schematic knowledge

David Klingelhoefer has designed and tested a variation of Thane Heins Bi-Toroid Transformer that outputs more power than is consumed. He has been able to get the primary circuit consumption down to 60 watts, while outputting 480 watts -- 8x overunity.

Full article at:

http://pesn.com/2011/03/20/9501793_T...ice_--_Part_1/

 Well with 4 replications going on at once, each is getting a share of time while the Modular Rig Systems are also being cut out and despatched.

Replication is under way with Cores arriving a couple of weeks ago, as well as the 417 cores we also have received a 117 higher permability core.
And yep they are big!




Cable for inner and outer windings has also arrived and will start winding soon.



David is kindly posting over a shell for us to use, the same as he used in his device.

More as usual, when time allows.

Cheers

Sean.
 Got a couple of hours in on it tonight.

Bloody heavy wire this 16awg and tough work getting it tight around the core. Each winding has to be litterally yanked tight as hell.

Going for 2000 windings as this is what David used on his last one to get the voltage up.

Here is the coil mounted in a vice screwed to the bench as such!



First complete layer of winding works out to be about 350 turns. So only another 1650 turns to go 

As you can see it is nice and tight on the inside, but as usual fanned out on the outside. This will give us a good guide for the next layer though.



Cheers

Sean.Some pictures of the original working unit from David.









Higher res ones in the album
Okay Coil all finished and comes out at 3.5 ohms 





The Shell has been despatched and waiting for delivery !!

More to Come ....